This training course consists of a classroom presentation and a written test followed by a hands-on skills testing session. The classroom portion focuses heavily on the safety and stability characteristics of today’s most commonly used Scissor lifts including JLG, Genie, Skyjack, and many others. The hands-on portion is a great opportunity for growth as new and experienced operators learn, share and demonstrate new skills in a safe environment under expert supervision from an industry leading instructor. Learning how to accurately inspect a machine before use is a key element in reducing workplace injury and a strong focus in this curriculum. Finally, operators must pass a skills evaluation using current industry standards with approved documentation. Successful attendees receive a photo ID Operators card and a Certificate of completion valid for 3 years and recognized in all 50 States.
|
Course Highlights
Classroom Duration: 4 hrs.
+ Pre-use inspection 1 hr.
+ Practical Evaluation 2 hrs.
|
Training Takeaways:
Successful Candidates will be able to demonstrate knowledge and proficiency in the following areas:
- OSHA & ANSI Regulations
- Hydraulic Fluid Hazard awareness
- High Voltage Electrical Hazards
- scissor lift safety systems
- fall protection/fall arrest systems
- emergency procedures
- capacity restrictions
- main parts and functionality
- pre-use & job site inspections
- safe operating procedures
- MEWPS 5 degree protocols
- safe storage and transport procedures
A minimum score of 70% is required to pass the written exam before advancing to practical evaluations.
Applicable to Canada and US standards and regulations.
This training course consists of a classroom presentation and a written test followed by a hands-on skills testing session. The classroom portion focuses heavily on the safety, stability, and operational characteristics of today’s most commonly used Boom lifts including JLG, Genie, Skyjack, Snorkel and more. The hands-on portion is a great opportunity for growth as new and experienced operators learn, share and demonstrate new skills in a safe environment under expert supervision from an industry leading instructor. Learning how to accurately inspect and operate machines and the relevant workplace before use (a strong focus in this curriculum), is a key element in reducing workplace accidents and injury.
Finally, operators must pass a skills evaluation using current industry standards with approved documentation.
Successful candidates receive a Certificate of completion and a Photo ID Operators card valid for 3 years.
Applicable to Canada and US standards and regulations.
|
Course Highlights
Classroom Duration: 4 hrs.
+ Pre-use inspection 1 hr.
+ Practical Evaluation 2 hrs.
|
Training Takeaways:
Successful Candidates will be able to demonstrate knowledge and proficiency in the following areas:
- OSHA & ANSI Regulations
- Hydraulic Fluid Hazard awareness
- High Voltage Electrical Hazards
- boom lift safety systems
- fall protection/fall arrest systems
- emergency procedures
- capacity restrictions
- main parts and functionality
- pre-use & job site inspections
- safe and effective operating procedures
- hand signals for working with ground personnel
- MEWPS <5 degree protocols
- refuel, storage and transport procedures
This training course consists of a classroom presentation and a written test followed by a hands-on skills testing session. The classroom portion focuses heavily on the safety, stability, and operational characteristics of today’s most commonly used Scissor and Boom lifts including JLG, Genie, Skyjack, Snorkel and more. The hands-on portion is a great opportunity for growth as new and experienced operators learn, share and demonstrate new skills in a safe environment under expert supervision from an industry leading instructor. Learning how to accurately inspect and operate machines and the relevant workplace before use (a strong focus in this curriculum), is a key element in reducing workplace accidents and injury.
Finally, operators must pass a skills evaluation using current industry standards with approved documentation.
Successful candidates receive a Certificate of completion and a Photo ID Operators card valid for 3 years.
Applicable to Canada and US standards and regulations.
|
Course Highlights
Classroom Duration: 4 hrs.
+ Pre-use inspection 2 hr.
+ Practical Evaluation 2 hrs.
|
Training Takeaways:
Successful Candidates will be able to demonstrate knowledge and proficiency in the following areas:
- OSHA & ANSI Regulations
- Hydraulic Fluid Hazard awareness
- High Voltage Electrical Hazards
- boom and scissor lift safety systems
- fall protection/fall arrest systems
- emergency procedures
- capacity restrictions
- main parts and functionality
- pre-use & job site inspections
- safe and effective operating procedures
- hand signals for working with ground personnel
- MEWPS <5 degree protocols
- safe storage and transport procedures
This training course consists of a classroom presentation and a written test followed by a hands-on skills testing session. The classroom portion focuses heavily on the safety, stability, and operational characteristics of today’s most commonly used Warehouse Forklifts including Clark, Daewoo, Hyster, Nissan, Toyota, and more. The hands-on portion is a great opportunity for growth as new and experienced operators learn, share and demonstrate new skills in a safe environment under expert supervision from an industry leading instructor. Learning how to accurately inspect and operate machines and the relevant workplace before use (a strong focus in this curriculum), is a key element in reducing workplace accidents and injury.
Finally, operators must pass a skills evaluation using current industry standards with approved documentation.
Successful candidates receive a Certificate of completion and a Photo ID Operators card valid for 3 years.
Applicable to Canada and US standards and regulations.
|
Course Highlights
Classroom Duration: 4 hrs.
+ Pre-use inspection 2 hr.
+ Practical Evaluation 2 hrs.
|
Training Takeaways:
Successful Candidates will be able to demonstrate knowledge and proficiency in the following areas:
- OSHA Regulations
- Hydraulic Fluid Hazard awareness
- High Voltage Electrical Hazards
- forklift safety systems
- emergency procedures
- capacity restrictions
- main parts and functionality
- pre-use & job site inspections
- safe and effective operating procedures
- stability triangles
- center of gravity & combined center of gravity
- hand signals for working with ground personnel
- loading dock hazards
- low clearance areas
- propane safety and refueling methods
- safe storage and transport procedures
This training course consists of a classroom presentation and a written test followed by a hands-on skills testing session. The classroom portion focuses heavily on the safety, stability, and operational characteristics of today’s most commonly used Telehandler Forklifts including JLG, Lull, Genie, Gradall, Skytrack and more. The hands-on portion is a great opportunity for growth as new and experienced operators learn, share and demonstrate new skills in a safe environment under expert supervision from an industry leading instructor. Learning how to accurately inspect and operate machines and the relevant workplace before use (a strong focus in this curriculum), is a key element in reducing workplace accidents and injury.
Finally, operators must pass a skills evaluation using current industry standards with approved documentation.
Successful candidates receive a Certificate of completion and a Photo ID Operators card valid for 3 years.
Applicable to Canada and US standards and regulations.
|
Course Highlights
Classroom Duration: 4 hrs.
+ Pre-use inspection 1 hr.
+ Practical Evaluation 2 hrs.
|
Training Takeaways:
Successful Candidates will be able to demonstrate knowledge and proficiency in the following areas:
- OSHA Regulations
- Hydraulic Fluid/System Hazard awareness
- High Voltage Electrical Hazards
- Forklift safety systems – ROPS
- Emergency procedures
- Capacity restrictions
- Load chart analysis
- Main parts and functionality
- Pre-use & job site inspections
- Safe and effective operating procedures
- Stability triangles
- Center of gravity & combined center of gravity
- Hand signals for working with ground personnel
- Safe refueling methods
- Storage and transport procedures
This training course consists of a classroom presentation and a written test followed by a hands-on skills testing session. The classroom portion focuses heavily on the safety, stability, and operational characteristics of today’s most commonly used loader Backhoe’s such as Caterpillar, Case, International, John Deere, JCB, Kubota, Terex, and more. The hands-on portion is a great opportunity for growth as new and experienced operators learn, share and demonstrate new skills in a safe environment under the direct supervision of an industry leading expert instructor. Learning how to accurately inspect and operate machines and the relevant workplace prior to use, (a strong focus in this curriculum) is a key element in reducing workplace accidents and injury.
Finally, operators must pass a skills evaluation using current industry standards with approved documentation.
Successful candidates receive a Certificate of completion and a Photo ID Operators card valid for 3 years.
Applicable to Canada and US standards and regulations.
|
Course Highlights
Classroom Duration: 4 hrs.
+ Pre-use inspection 1 hr.
+ Skills Evaluation 2 hrs.
|
Training Takeaways:
Successful Candidates will be able to demonstrate knowledge and proficiency in the following areas:
- OSHA Regulations 1926.602 (d) earth moving operator training
- Hydraulic Fluid/System Hazard awareness
- High Voltage Electrical Hazards
- Loader backhoe safety systems
- Emergency procedures
- Main parts and functionality
- ROPS
- Independent braking system
- Digging operation parameters/setup
- Pre-use & job site inspections
- Daily preventive maintenance
- Safe and effective operating procedures
- Center of gravity & combined center of gravity
- Stability triangles
- Safe refueling procedures
- Storage and transport procedures
